When we use the wood cnc router, it is inevitable that we will not encounter some troublesome work, which is time-consuming and laborious, which is very worrying. In fact, when using a wood cnc router to do this kind of work, there are certain skills that can be followed, and these skills can completely make our work more effective. Now, let’s learn a few common skills with us.

1. Engraving of plastic patterns

For engraving plastic patterns, you can stick the transfer tape on the back of the engraved object, and then spray the side with the tape on the liquid spray glue, and then stick it on a surface that can be discarded, so as to avoid the use of double-sided tape. It leaves a surface that is difficult to clean.

2. Fixation of irregular shaped sculptures

For those carved objects with irregular shapes, they appear to be tightly fixed on the surface, and they will shake back and forth when subjected to downward pressure. At this time, you can try to put some waste under the object to increase friction. The other is to keep the packaging that comes with the item. Although the object is irregularly shaped, the packaging it carries may be very regular and easy to be fixed. Add a small strap to make an irregularly shaped object. Easy to be fixed.

3. Fixation of the carved object

Since woodworking engraving machines are often equipped with multifunctional pliers or chucks, and they are made of iron, it is easy to cause damage to the engraved object or make it slip off during the engraving process, so choose some rubber caps or rubber tubes for The fixation of the engraved object will solve this kind of damage problem to a certain extent.


Post time: Apr-08-2021