It is obvious in summer that the temperature is high, which will affect the use of laser cutting machines to a certain extent. Therefore, in summer, we must take measures to maintain the cutting machine equipment to avoid some external factors that have adverse effects on the equipment. So the following editor will discuss how to maintain the equipment in the summer.

1. The temperature rises in summer, and the working pressure of the cooling system of the metal laser cutting machine increases. It is recommended to maintain the pressure of the cooler before the high temperature, and the pressure of the equipment of different manufacturers is also different. It is recommended to consult the equipment manufacturer for specific parameters before maintenance.

2. Before the machine works, it must be ensured that the laser tube is full of circulating water. The quality and temperature of the circulating water directly affect the service life of the laser tube. Therefore, the circulating water should be replaced regularly and the water tank should be cleaned. Try to do it once a week.

3. There will be some reflectors and focusers on the metal laser cutting machine. The laser is reflected through these lenses. After focusing, it is emitted from the laser head. The lens is easily contaminated by dust or other contaminants, resulting in loss of laser light or damage to the lens. So clean the lens every day. When cleaning, please note:

①The lens should be wiped gently without damaging the surface coating

②The wiping process should be placed gently to prevent falling

③ When installing the focusing lens, be sure to keep the concave side down

4. In summer, due to the higher temperature, the deterioration rate of cooling water will also be accelerated. It is recommended that users of metal laser cutting machine use distilled water or pure water, and regularly clean the scale, so as not to adhere to the scale in the laser pipeline and affect the laser power. Different types of cutting machines have different methods of cleaning scale and need to operate under the manufacturer’s guidance.

5. Since the dust of the metal laser cutting machine is mainly metal powder, it is recommended to regularly clean the dust in the electrical cabinet of the cutting machine and check the working condition of the cooling fan.

Therefore, when maintaining the metal laser cutting machine in summer, we must pay attention to whether its maintenance method is correct and whether it is suitable for the current needs of the cutting machine equipment. At the same time, after the maintenance of the cutting machine equipment is completed, do not put it into use directly, but conduct a trial run test first to avoid damage to the equipment during the maintenance process.

Released by Jinan APEX Machinery Equipment Co., Ltd.