The linear guide in the laser cutting equipment is an indispensable part, and the difference in its quality can affect the accuracy of the laser cutting machine. Therefore, when choosing linear guides, laser cutting machine manufacturers will strictly check the purchase. In addition, the maintenance of linear guides can not be ignored.

Why do you need to maintain the linear guide of the laser cutting machine?

Linear guides play the role of guiding and supporting in the laser cutting machine. The smoother the movement of the guides, the higher the machining accuracy of the laser cutting machine. Therefore, the requirements for the guides are very high. However, in daily production, the dust generated by processing will remain in the groove of the guide rail, which will wear the guide rail over time without lubrication. As a result, the precision of the laser cutting machine equipment will be reduced.

cutting machine1

What are the ways to maintain linear guides?

1. Remove the guide rail from the device, and then wipe off the dust and waste with a rag.

2. Brush part of the lubricating oil in the guide rail groove, and then move back and forth on the guide rail several times to spread the lubricating oil evenly.

3. Install the guide rail on the device, start the power test machine, and see if it can operate normally.

The parts in the laser cutting machine are relatively precise. In order to achieve the best performance of the equipment, it is necessary to regularly maintain the equipment, which can not only prolong the mission of the metal laser cutting machine, but also improve the processing accuracy.

cutting machine2

Released by Jinan APEX Machinery Equipment Co., Ltd.


Post time: Jun-15-2022