The laser cutting machine can be seen in many places. In order to better use the laser cutting machine, let me introduce to you what factors will affect the cutting speed of the laser cutting machine.

1. Thickness and roughness of the material

Laser cutting is suitable for cutting thin plates. The thickness of the good effect is carbon steel below 12mm and stainless steel below 6mm. The quality of the processed is obviously enhanced, and the efficiency is also guaranteed. If cutting <1mm material, the incision will also be extremely smooth. The surface roughness of the material also determines the quality of the cutting. Generally, the smoother the material, the better the cutting quality.

2. Working power and mode of laser equipment

After research, it has been proved that the higher the power of the laser equipment, even if it cuts the same plate, the effect will be better than the general one. The laser cutting pattern and material have a certain degree of fit.

3. The focal position

The focus of the laser cutting machine can be aligned, and the cutting precision and accuracy can meet the desired requirements.

4. Cutting speed

In fact, no matter what kind of material, the cutting speed can be extremely consistent with the material, then the cutting effect at this time is better, too fast or too slow will affect the laser cutting.

5. Auxiliary gas pressure and type

The higher the pressure of the auxiliary gas, the higher the purity of the gas, the less impurities adhered to the material, and the smoother the cutting edge. Generally speaking, the cutting speed of oxygen is fast, the cutting effect of nitrogen is better, and the cost is also low. Different gases have different cutting effects.